We've coupled a proximity card reader with a biometric fingerprint sensor to create a door/portal access control device for locations that require identity confirmation with controlled access.

This proximity access card reader is coupled with a biometric fingerprint sensor for extra security. Maximum distance is approx. 15cm (5.9 inches). Constructed of tough ABS plastic.

• Designed for indoor installation
• Short response time
• Standalone or use with PC (software included)
• Large fingerprint capacity (up to 4500) & high recognition rate
• Backup recognition mode for pool fingerprints, password or ID card
• Master card assignable
• Card capacity: 10,000 users
• One RS-485 port supported for networking
• Fingerprint database download/upload supported
• Built-in watchdog to prevent the system from halting
• External reader port 26/34 bit Wiegand format for anti-pass-back.
• Alarm function available (tamper, force entrance, door open too long)
• Keypad locks for 30 seconds, while continuous error operation
• Universal serial port supported for LED display, printer, lift controller, ETC
• Lift control: 5,000/32 stops
• Access mode: card only, card or PIN, card and PIN
• Fingerprint access mode: card & fingerprint, card or PIN & fingerprint, card & PIN & fingerprint, 4 digit user number & fingerprint
• Matching mode: High end optical sensor 500 dpi resolution @ 8 bit gray scale
• Area of input: 18mm x 16mm
• Panel display: English, French, Italian, Danish, Greek, Spanish
• External reader port: suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader
• Networking: RS-485, 9600, N, 8, 1
• Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. / latch type
• Alarm relay: 12VDC @ 2A NO/NC/jumper selectable 0.0-600 sec.
• Serial port: supported for ACC995, LED display, relay board, printer (4800, N, 8, 1)
• Anti-pass-back: yes
• Door group: 255
• Time zone: 63
• Event storage capacity: 11,000
• Card reading range: 8-15cm (3.15"-5.91")
• Power: 9-24VDC, <5W
• Temperature: -20° C - 75° C (-4° F - 167° F)