|
|
Requires 12VDC to lock. If power is lost, the dead bolt is
withdrawn so the door is unlocked. A constant, small amount of
current is required to maintain the dead bolt when in its locked
position.
Use an ECL-ACC710 for a housing if you don't already have
one.
|
- Fail safe type (power to lock)
- Door sensor: N/C - N/O
- Selectable operation delay time: 0, 2.5, 5, 9 seconds
- Diameter: 15.5mm
- Throw: 16mm
- Power: 12VDC
- Operating current: 900mA
- Holding current: 360mA
- Face plate dimensions: 200mm x 32mm x 40mm (7.87" x 1.26" x 1.57")
- Strike plate dimensions: 90mm x 26mm x 2mm (3.54" x 1.02" x .08").
|
Click here to order a catalog!