This hub connects power and video signals to RJ-style (RJ45) connectors for transfer to cameras.

• 4 port passive hub

• Sends power to cameras

• Use with ECL-B45X4 on the receiver side to achieve longer distance.

• Use with ECL-B45PW for powering cameras through CAT 5 cable*.

*Note: Typical category 5 cable uses 24 AWG (American Wire Gauge) twisted pair copper wire and is designed to safely carry 12VDC power required for most surveillance cameras when configured properly using pins 4 and 5 of the standard jack (8P8C modular connector). Always be aware of safety considerations, wire routing considerations, environmental considerations and voltage drop after 100 meters when using powered Cat 5 cable.