important: read this before you upgrade any Nubix dvr
firmware!!!!!!!!!!!!!!!!!!!!!
HERE ARE THE FIRMWARE FILES THEY ARE ZIPPED SO YOU MUST UNZIP THEM TO BE
ABLE TO USE THEM.
WHEN UPDATING FIRMWARE ON DVR YOU MUST KNOW WHAT FIRMWARE IS CURRENTLY LOADED IN
THE DVR BY GOING TO THE MAIN MENU AND SELECTING THE "SYSTEM" TAB. A FIELD NAME
"VERSION" WILL DISPLAY THAT FIRMWARE VERSION CURRENTLY LOADED IN THE DVR.
THE ORDER THAT FIRMWARE HAVE TO BE LOADED ARE AS FOLLOWS:
UNDER 1.3.1 --> 1.3.1 PATCH --> 1.3.3 --> 1.3.4 --> 1.3.5.3 --> 1.3.6
IF YOU DON'T FOLLOW THE ORDER OF FIRMWARE YOU CAN HALT THE SYSTEM AND CAUSE THE
DVR NEVER TO BE USABLE.
FIRMWARE CAN BE LOADED ONTO THE DVR BY THE USB PORT, LOAD THE FIRMWARE FILE TO
THE USB MEMORY, INSERT IT IN THE USB PORT OF THE DVR, THEN REBOOT DVR, AS ITS
BOOTING UP IT WILL PROMPT YOU TO ACCEPT THE FIRMWARE UPGRADE. DVR WILL PROCEED
WITH UPGRADE AND WILL REBOOT WITH THE NEW VERSION. REPEAT AGAIN WITH THE
FOLLOWING VERSION IN THE ORDER.
4-channel nubix dvr
1.3.6 4CH:
NUBIX4 SATA CONVERTER COMPATIBLE VERSION 1.3.6 LATEST 3/25/09
1.3.5.3 4CH:
NUBIX4 VERSION 1.3.5.3
1.3.4 4CH:
NUBIX4 VERSION 1.3.4
1.3.3 4CH:
NUBIX4 VERSION 1.3.3
1.3.1 PATCH 4CH:
NUBIX4 PATCH VERSION 1.3.1
8- and 16-Channel Nubix dvr
1.3.6 8CH AND 16CH:
NUBIX 8 AND 16 SATA CONVERTER COMPATIBLE VERSION 1.3.6 LATEST 3/25/09
1.3.5.3 8CH AND 16CH:
NUBIX 8 AND 16 VERSION 1.3.5.3
1.3.4 8CH AND 16CH:
NUBIX 8 AND 16 VERSION 1.3.4
1.3.3 8CH AND 16CH:
NUBIX 8 AND 16 VERSION 1.3.3
1.3.1 PATCH 8CH AND 16CH
NUBIX 8 AND 16 PATCH VERSION 1.3.1
|
