An outdoor vandal resistant CCTV
security camera with radiant infrared that is immune to
glare, haze and internal reflections.
Effio™ Video Processing Technology
The Effio video processor sits at
the analog front end (AFE) of the video image capture
process (see simplified diagram at left). Here it intercepts
signals prior to digital signal processing. This provides
the DSP circuitry with clean and efficient signals that make
its job easier, freeing up space for further enhancements to
be added to the available real estate on the chipset at
micro-component level. These enhancements create higher
resolution and provide more options in the OSD.
Effio video processing depends on a chain of support
circuitry. If the support circuitry is mismatched it injects
noise. Noise un-does the primary purpose of
Effio by destroying image quality at the front end. Some
CCTV camera manufacturers find it profitable to substitute
low cost generic components. This saves manufacturers big
bucks over large production runs. But engineers know generic
parts make mismatched support circuits, and that means noise
in the signal. Our engineers
specify matched components throughout the
entire design, insuring clean signals and giving this Eclipse camera full Effio
Loaded with Features, Including PrePro
The multilingual OSD menu in this
camera provides the user with a window into a wealth of
options. There are so many features and options it's easy to
get confused. In fact some OSD menu cameras force you, as
the installer, to spend a lot of time going through each
setting until you find the right combination for optimal
performance. We know time is money, so we created the PrePro
PrePro stands for
Pre-Programmed. Our engineers have already programmed
default settings in the chipset for optimal performance.
That's a lot of words to say "when you reset the camera to
factory default, it's good-to-go 99% of the time."
Of course PrePro doesn't handle
every situation. But it will satisfy a wide variety of users
in most common settings, and the time/cost savings alone
make this camera incredibly attractive for large scale
Dual Power & Sniper Infrared Source
Major features in this dome CCTV security camera include two
of our innovations, dual power sourcing and a high-intensity
externally mounted point
source IR LED.
Use 12VDC or 24VAC with this camera without fear of having a
switch or jumper set incorrectly. The camera automatically
handles power conversion. This simple innovation makes the
ECL-577DBS dome camera easy to add to existing surveillance
The outside of the camera holds a recessed "sniper" style,
high intensity LED that makes it impossible for anyone to
use the cover of darkness. The
position of the IR LED, on the outside of the case,
eliminates infrared haze, glare, and any possibility of IR
reflection off the inside of the dome.
Compare Dome Cameras
Not sure which dome camera model will fit your needs best?
Check out our Dome Comparison Chart, which shows all of our dome camera models.