This indoor camera uses a 1/4" color CCD 420-line video sensor and a 3.6mm precision fixed focus lens. A built-in digital signal processing chipset maintains picture quality during day and night, when the automated infrared system (under photo-sensor control) turns on this security camera's IR LEDs, which enable it to light up a pitch black room as bright as day (from the cameras perspective).

Auto-switching is the ability of the camera to switch between night mode and day mode without user intervention. This ability is standard in all of our cameras. Video at night (in infrared mode) is black-and-white. In daylight, or when available light is high enough to render color images, then color video mode returns.

This indoor security camera is a  great solution for monitoring movement inside buildings like nursing homes and adult/juvenile care facilities. Placement in storage rooms will cut down on unauthorized access. Put them in stairwells to cut down on trespassing, loitering and unwanted visitors. With it's built-in infrared array you can depend on clear, sharp video with or without the lights on, making this a great all-purpose general security camera.

• Video sensor: 1/4" color CCD
• Optics: 3.6mm precision ground board lens
• Resolution: 420 horizontal lines using Eclipse measurements, which translates to approx. 460 lines using less stringent de facto industry standard measurements
• Effective pixels:
  • NTSC: 512 x 492 (251k)
  • PAL: 512 x 582 (297k)
• Minimum illumination: 0.8 LUX,
  0.0 LUX with IR on
• 11 IR LEDs (auto-on, auto-off depending on lighting conditions)
• 850nm wavelength infrared LEDs (visible red glow when operating)
• IR Range: 20-25 feet
• Auto electronic shutter (AES)
• Power: 12VDC (150mA nominal, 350mA during IR)
• Bracket, mounting kit, and attached video/power cable included.
• Color: BLACK & BEIGE
• Power adapter not included
• Click for Specification Sheet