The ECL-IP22MP is the second generation
of ECL-IP20MP camera series. It uses a RISC architecture
processor to provide high definition streaming video output
in a variety of compression formats. It also has a mechanical IR
filter to protect video quality when switching from day mode to
night mode.
Image pickup starts with a 3.6-16mm
manual varifocal lens (megapixel rated). A 1/3-inch CMOS 2M
video sensor generates high definition, 720P images at up to 30
frames per second, which can be adjusted through on-board
controls (brightness, color, etc.).
If you need to communicate with the
people you are monitoring you can do so with this camera,
since it offers 2-way audio communication (you will need to
add your own microphone and speaker).
This camera is also easy to setup,
thanks to a video cable the installer can use to test aim
and focus during installation (if they have a portable
monitor). No need to leave the ladder or scaffold, or make
return trips.
16G memory is built-in, so images
can be saved in the camera in case of network malfunction.
If you require more memory, contact us for special orders.
To make things even easier during
installation, the ECL-IP22MP camera has a built-in composite
video output (BNC connector). This foresight makes set up a
snap if you have portable test monitor. Use it to adjust aim
and focus and reduce trips up the ladder.
Another premium we've added to this
camera is a connector block that allows professionals to
connect a sensor and an alarm to this camera.
Click here for a spec. sheet
.
Click here to order a catalog!