This proximity card reader is a perfect access control device for inside doors in any sensitive area. Maximum distance is approx. 15cm (5.9 inches). Constructed of tough ABS plastic.

• 12 character numeric keypad

• 1 red/green LED

• Buzzer

• 11 sets of time codes

• Up to 120 holiday schedules

• Keypad will lock for 30 seconds after continuous error operation

• Built-in watchdog to prevent system halting

• Support delay relay auto-relock function

• RS-485 support for networking (via controller or directly)

• Built-in reader and additional reader support port for exit or anti-pass-back function

• Control mode, card capacity and card type assignable by user directly

• RF Frequency / Reading range 125 kHz / 10-18cm

• Networking: RS-485, 9600, N, 8, 1

• External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader

• Door relay: 12VDC @ 2A NO/NC/COM 0.1-60 sec. latch type

• Alarm relay: transistor output/serial output (selective)

• DI input: Egress button / door sensor / card sensor

• Tamper switch

• Serial port: limit switch (form C)

• Made of ABS plastic

• Dimensions: 112mm x 76mm x 25mm (4.41" x 2.99" x .98")

• Use standalone or with our ECL-ACC1000.

• Connect to PC using ECL-CN550.