This weatherproof proximity card reader is a perfect access control device for doors in factories, office buildings, and other sensitive areas. Maximum distance is approx. 18cm (7 inches), depending on weather conditions. Constructed of tough ABS plastic.

• Big and clear LCD display, 4 lines text, 1024 x 64 pixel graphic

• Unlimited site codes

• 11 sets of time zones

• Different time zone for each user

• Up to 120 holiday schedules

• Auto-show work status (set via time zone edit)

• Master cards range assignable

• RS-485 support for networking (via controller or directly)

• Built-in door sensing and arming inputs (on/off)

• Auto open/close scheduling of doors

• Control mode, card capacity and card type assignable by user directly

• Built-in proximity reader and external Wiegand reader port

• Auto-discriminating between stand-alone & networking system

• Alarm function available (tamper, force entrance, door sense)

• Networking: RS-485, 9600, N, 8, 1

• External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader

• RF Frequency / Reading range 125 kHz / 10-18cm

• Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. latch type

• Alarm relay: 12VDC @ 2A NO/NC/(jumper) 0.0-600 sec. (COM Common)

• DI input: Egress button / door sensor / card sensor

• Transistor output: Arming / door sensor / card sensor

• Tamper switch limit switch (form C)

• Serial port: supported for AI-401R016, LED display, relay board, printer ETC. (4800, N, 8, 1)

• Made of ABS plastic

• Dimensions: 127mm x 91mm x 46mm (5" x 3.58" x 1.81")

• Connects easily to our ECL-ACC1000.

• Connect to PC using ECL-CN550.