Newest KB Articles in Access Control

990LR Número de tarjeta de registro incorrecto o no válidos Tarjeta

Mon, 29 Jun 2009 17:17:40 GMT

990LR Número de tarjeta de registro incorrecto o no válidos Tarjeta

Si usted está recibiendo un error en la tarjeta no válido o incorrecto el número de la tarjeta se está registrado, a través de su 990LR. Es posible que usted está usando 34 bits y tarjetas de proximidad para que funcione correctamente, por favor, el cable 990LR correctamente siguiendo la siguiente tabla:
conectar el cable amarillo a tierra 990LR de 34 bits para aceptar tarjetas de proximidad.

990LR registering wrong Card Number/ Invalid Card

Tue, 16 Jun 2009 13:58:49 GMT

If you are getting an invalid card error or wrong card number is being registered, through your 990LR. It is possible that you are using 34 bit proximity cards and to make it work properly, please wire the 990LR correctly by following the chart below:
connect the yellow wire to ground of 990LR to accept 34 bit proximity cards.

WIRING DIAGRAMS: CONNECTING TWO READERS (900,950,960,970,995) TO A N.C. LOCK

Wed, 25 Mar 2009 16:09:20 GMT

WIRING DIAGRAMS: FOR READER (900,950,960,970,995), BUTTON, AND N.O. LOCK

Wed, 25 Mar 2009 13:29:09 GMT

WIRING DIAGRAM FOR READER (900,950,960,970,995), BUTTON, AND N.O. LOCK

WIRING DIAGRAMS: FOR READER (900,950,960,970,995), BUTTON, AND N.C. LOCK

Wed, 25 Mar 2009 13:24:29 GMT

WIRING DIAGRAM FOR READER (900,950,960,970,995), BUTTON, AND N.C. LOCK

WALK THROUGHS (SPANISH,ESPAÑOL)

Wed, 25 Mar 2009 12:57:40 GMT

ESTOS SON LOS PASOS BASICOS PARA CONFIGURAR EL SERVER Y CLIENT.

AvatarHandler.ashx?radfile=%2fDepartments%2f8%2fConectando+las+Lectora+a+la+computador.zip

How to connect the ACC-1000 Control Panel to the PC with RS-485 communication

Tue, 17 Mar 2009 19:19:27 GMT

On the Control Panel move the 4 jumpers to the RS-485 side, and also remove the TCP/IP chip. Connect two conducter wire from the HOST terminals to the RS-485 interface to the computer.

Access Control Client Software for Nubix Integration

Wed, 21 Jan 2009 20:32:41 GMT

Access Control Client Software for Nubix Integration

Wed, 21 Jan 2009 20:32:41 GMT

Access Control Client Software for Nubix Integration

How do i program a pin number only on the Access Control readers?

Wed, 10 Dec 2008 19:03:04 GMT

1. 900H (Mode 8)

(a) 04*8#

(b) 12*XXXXX*PPPP#

XXXXX: user address

PPPP : 4 digits PIN

2. 950H (Mode 8)

(a) 5. Tools => 9.Control Mode => 3. M8

(b) 2. User Setting => 2. Access Mode => input user ID => 2. or PIN

3.995EF

(a) 701Server --> 829Parameter -> Select [PIN only]

(b) download to your 995EF